|
马上注册,结交更多热工坛友,更多精彩内容等着您!
您需要 登录 才可以下载或查看,没有帐号?免费注册
x
30CrMnSiNi2A 钢壳体毛坯的温挤压成形工艺研究
伍太宾 , 周强
(重庆工商大学 机械与包装工程学院 ,重庆 400067)
[摘要] 针对 30CrMnSiNi2A超高强度钢制壳体毛坯的结构特点和材料工艺特性 ,对该壳体
毛坯的温挤压成形工艺进行了大量的试验研究;并采用“正交试验方法”对温挤压工艺参数进行了
优化设计。经过理化检测和使用结果表明 ,采用温挤压工艺生产的 30CrMnSiNi2A钢制壳体毛坯
锻件完全满足壳体的使用要求 ,各项性能指标合格。
[关键词] 30CrMnSiNi2A; 温挤压; 壳体; 毛坯
中图分类号:TG376.2 文献标识码:B 文章编号:1000 - 8446(2004)01 - 0011 - 03
Study on the Warm Extrusion of Shell Body Blank Made by 30CrMnSiNi2A
WU Tai2bin , ZHOU Qiang
(Chongqing Technology and Business University,Chongqing 400067 ,China)
Abstract: In view of the construction feature of shell body blank made by 30CrMnSiNi2A and the
specificproperty of material ,the experiments are performed to investigate the warm extrusion of shell
body blank;and theoptimized designof major processparameters arefinished by meansof ”experimental2
orthogonal method”。The experimented results show that the forging of shell body manufactured by
warm extrusion fulfil quality requirements,and each of property target is up to standard。
Key words: 30CrMnSiNi2A;warm extrusion;shell body ;blank |
评分
-
查看全部评分
|