品质检测术语

admin

品質檢測術語
           
void假焊
insufficient solder虛焊
cold solder joint冷焊
granular solder少錫
torn破爛
abrasion磨損
colour variation/colour faded色差,色淡
mould shrinkage縮水
contamination污染
colour contamination混色
chips 鑄 碼,鑄幣,缺料,缺口
oxidation氧化
strain at connection焊點移位
burrs毛邊
exposure of conductive lead導電體外露
poor electro-plating電渡不良
streak/silver條紋/銀絲
scratches刮花
flow lines/cold-bounded joint夾水紋/氣泡
sharp edge利邊
burrs毛邊,批鋒
insufficient adhension脫油
breakdown機械故障
mechanical failure機械故障
unfitting assembly裝配不良
incorrect crimp connection裝配不良
print quality顏色錯
off set position位置不對
strain at connection焊接移位
exposure of conductive lead導電體外露
packing method包裝方法
toxicity毒性
fancy box/card insert內卡
silver soldering銀焊
tinned鍍錫的
sealing tape封條,封箱膠紙
approval mark論證標識
internal check拆機檢查
welding焊接法,定位焊接
corrosive腐蝕性的
resulting hazard可能產生的問題
electro-shock電休克
oxidation氧化
creepage漏電
striped screw head螺絲頭斷
critical defect致命缺點
major defect嚴重缺點
minor defect輕微缺點
bar code條形碼
face down bonding側焊
solder dip浸焊
solder brazing硬鑯焊
lead-tin soldering鉛錫焊
electric welding電焊
gross average平均毛重
bad contact接觸不良
water gap水口
foreign matter雜質
stripped part of the wire much too long開線太長
internal check拆機檢查